Mounting The Blower Dryer To The Dishwasher - Champion E Series Installation/Operation Manual With Service Replacement Parts

Installation

Mounting the Blower Dryer to the Dishwasher

The blower dryer is shipped separately on its own pallet . Refer to the diagrams below and on
the next page to mount the blower dryer to the top of the dishwasher.
To mount the blower dryer:
1. Refer to the diagram below noting the placement of (2) 2 X 4 boards to lift the BD when
using a forklift.
2. Use 4 men to lift and place the unit on the dishwasher if a forklift is not
available. The BD weighs 225 lbs. The 2 X 4's are not used if placing manually.
10-1/2"
2 x 4 board placement when lifting the blower dryer with a forklift.
Use extreme caution and follow all safety procedures when lifting and
2
Side
28-1/2"
39"
Left to Right Operation Shown
! CAUTION !
moving the blower dryer assembly.
28-1/2"
2" x 4" x 36" Lg. Board
Front
25"
36"