Champion E Series Installation/Operation Manual With Service Replacement Parts page 11

3. Position the Blower dryer over the dishwasher blower dryer opening.
4. Lower to a height of approximately 2" above the opening.
5. Carefully lower the backside of the blower dryer as you remove the rear board from
underneath the blower dryer.
6. Carefully lower the front of the blower dryer over the opening as you remove the
last board.
7. Bolt the unit using flat washers, lock washers, and 5/16-18 x 3/4" hex head bolts.
8. Connect the electrical or steam supply lines after the dishwasher is permanently
installed.
9. Attach the blower dryer hood intake (not shown) to the end of the blower dryer.
10. Blower dryer mounting is complete.
Top of unload section
Forklift
Mounting the Blower Dryer to the Dishwasher
Left to Right Operation Shown
Lifting the blower dryer with a forklift.
Installation
(continued)
Mounting
Hardware
3