Installation; Receiving - Champion E Series Installation/Operation Manual With Service Replacement Parts

NOTE:
The installation of the Blower Dryer must be performed by qualified service personnel.
Problems due to improper installation are not covered by the Warranty.
NOTE:
The installation of the blower dryer must comply with all local electrical, plumbing, safety
and health codes.
NOTE:
The Blower Dryer was fully tested before leaving the factory. It was disassembled
from the dishwasher and shipped on its own pallet.
CAUTION:
Be careful when lifting and moving the blower dryer to prevent damage to the unit.
1. Inspect the blower dryer and pallet for signs of shipping damage.
2. Turn to the front of this manual and follow the instructions to register your
blower dryer and dishwasher online. The blower dryer does not have a
serial number; therefore, the blower dryer will be registered when the
dishwasher is registered.
3. Move the blower dryer and the dishwasher near their permanent locations.
4. Compare the installation site utility connections with the machine utility
connections and make sure they are the same.
5. Follow the installation instructions contained in this manual to mount the
blower dryer to the top of the dishwasher.
6. Follow the dishwasher Installation/Operation Instructions Manual that was
shipped with the dishwasher to install the dishwasher.
7. Follow the operation instructions contained in this manual to operate the
blower dryer.

Installation

Receiving

1