Operation; Normal Blower Dryer Operation; Blower Dryer Shut-Down Operation - Champion E Series Installation/Operation Manual With Service Replacement Parts

THE BLOWER DRYER RUNS WHENEVER THE DISHWASHER PUMPS ARE ON.
1. Press the AUTO BUTTON on the blower dryer control panel.
2. The Green indicator light will illuminate.
3. Turn the dishwasher POWER switch to the ON position.
4. Push the START button (or speed select button on the E2 series upright machine).
5. The conveyor will begin to run.
FOR RACK CONVEYOR DISHWASHERS:
6. Insert a dish rack of wares into the load end of the dishwasher.
The wash pumps will run.
FOR UPRIGHT CONVEYOR DISHWASHERS:
7. Load the conveyor belt with wares.
The pumps will run when the electric eye is activated.
8. THE BLOWER DRYER RUNS.
9. When the dishwasher pumps stop running, the blower dryer runs for 30 seconds
after the dishwasher pumps stop.
THE BLOWER DRYER STOPS WHENEVER A CONVEYOR JAM CONDITION
OCCURS OR THE UPRIGHT CONVEYOR SHUT-OFF SHELF IS OPERATED.
1. Press the OFF button on the blower dryer control panel.
2. The Green indicator light will go out.
3. If the blower dryer was running when the OFF button was pressed, then the blower
dryer will run for an additional 30 seconds and then stop.

Normal Blower Dryer Operation

! ATTENTION !
! ATTENTION !

Blower Dryer Shut-down Operation

Operation

7