Truecharge™ 2 Battery Charger - Xantrex Truecharge2 Series Installation Manual

Introduction
Truecharge™ 2 Battery Charger
1–4
Downloaded from Elcodis.com electronic components distributor
This section describes the different parts of the Truecharge™
2 Battery Charger.
1
3
5
Figure 1-1 Truecharge™ 2 Battery Charger
Item Description
1 Onboard control and status display panel or simply
onboard display (see "Rear Panel" on page 1–6 for
more information) for controlling the Truecharge™ 2
Battery Charger settings and for monitoring charger
status and charging current.
2 Mounting flanges are used to permanently install the
product.
3 DC wiring compartment cover protects the DC
terminals, as well as the communication and BTS ports.
Remove and replace when installing cables.
This guide for use by qualified installers only
2
4
6
975-0402-01-01