Physical Specifications; Tc1012; Tc1512; Tc2012 - Xantrex Truecharge2 Series Installation Manual

Specifications

Physical Specifications

Base Unit
Dimensions:
L × W × H
Weight
AC input
connections
DC output
connections
A–2
Downloaded from Elcodis.com electronic components distributor
TC1012, TC1512:
200 × 170 × 70mm (7.87 × 6.70 × 2.76 in.)
TC2012, TC3012, TC4012:
250 × 170 × 70mm (9.84 × 6.70 × 2.76 in.)
TC5012, TC6012:
350 × 170 × 70mm (13.78 × 6.70 × 2.76 in.)
TC1524, TC2024:
250 × 170 × 70mm (9.84 × 6.70 × 2.76 in.)
TC3024, TC5024:
300 × 210 × 125mm (11.81 × 8.27 × 4.92 in.)
TC1012, TC1512:
TC2012, TC3012, TC4012:
TC5012, TC6012:
TC1524, TC2024:
TC3024, TC5024:
Three color-coded No. 14 AWG wires (L, N,
152 mm (6 in.) long in a separate AC wiring enclosure with
21.3 mm (0.84 in.) hole provision for connection of a ½ inch
North American "trade size" strain relief (included).

TC1012:

Two M6 studs (1 positive and 1 negative) for battery cable ring
terminals and one M6 mm DC equipment ground

TC1512:

Three M6 studs (2 positives and 1 common negative) for battery
cable ring terminals and one M6 mm DC equipment ground
TC2012, TC3012, TC4012, TC5012, TC6012, TC1524,
TC2024, TC3024, TC5024:
Four M6 studs (3 positives and 1 common negative) for battery
cable ring terminals and one M6 mm DC equipment ground
This guide for use by qualified installers only
2.0 kg (4.4 lbs)
2.2 kg (4.8 lbs)
4.5 kg (9.9 lbs)
2.2 kg (4.8 lbs)
5.0 kg (11.0 lbs)
) minimum
GND
975-0402-01-01