J31069-D0416-U001-A5 - Siemens SIMATIC CM35 Manual

Foreword
Aids to finding
information in this
manual
Standards
ii
This manual offers the following aids to help you find the special information
you want.
A comprehensive table of contents is located at the beginning of the
S
manual.
All chapters provide a left- - hand column with an overview of the contents
S
of the particular section.
At the end of the manual, you will find a glossary defining important
S
terms as they are used in the manual.
The SIMATIC S7- - 300 programmable controller meets the requirements of
standard IEC 1131.
Contact your Siemens representative at your nearest Siemens office or the
SIMATIC hotline (telephone no. 0911/895-7000 or fax no. 0911/895-7002)
for questions on the products described in this manual for which you are un-
able to find answers.
For questions or comments on the manual itself, please fill out the response
sheet at the end of the manual, and return it to the address indicated. We
would also appreciate your including your personal opinion of the manual on
the response sheet.
We offer courses to make it easier to get started with the SIMATIC automa-
tion system. Please contact your regional training center or the central train-
ing center in Nuremberg (tel. no. 0911/895-3154).
CM35 Counter Module

(4) J31069-D0416-U001-A5-7618