Table of Contents
Advertisement
Commissioning
3-2
Note
The following rules must be adhered to ensure that EU guidelines
89/336/EWG have been met.
The setup guidelines and safety notes in the manuals and supplementary
S
documentation must be adhered to for both the programmable controller
and the CM35.
To achieve maximum EMC immunity, all signal lines to the CM35 must
S
be shielded and applied to a grounded shield retainer rail.
On the CM35, the cable shield may not be applied to the sub D plug con-
S
nector.
CM35 Counter Module
(4) J31069-D0416-U001-A5-7618
Advertisement
Table of Contents
