Table of Contents
Advertisement
Notes on safety
!
!
!
Qualified
personnel
Use as intended
!
Brands
Copyright E Siemens AG 1997- - 2000, All rights reserved
Passing on to third parties, reproduction, utilization and revelation of
this document is not permitted without express permission.Violators
will be liable for damages.All rights are reserved, in particular rights
created by a patent grant or registration of a utility model or design.
Siemens AG
Automation and Drives
Motion Control Systems
Frauenauracher Strasse 80
D-91056 Erlangen
Siemens Aktiengesellschaft
This manual contains notes which you must adhere to for your own personal safety and to
avoid property damage. These notes are highlighted with a warning triangle showing the
degree of danger as shown below.
Danger
Means death, severe personal injury or significant property damage will occur when the
appropriate precautionary measures are not taken.
Warning
Means death, severe personal injury or significant property damage may occur when the
appropriate precautionary measures are not taken.
Caution
Means minor personal injury or property damage may occur when the appropriate precautio-
nary measures are not taken.
Note
Highlights important information about the product, its handling or a particular portion of
the documentation which requires special attention.
Only qualified personnel may commission and operate the device. For the purpose of the
safety notes in this manual, qualified personnel are those persons who are authorized to com-
mission, ground and tag devices, systems and electrical circuits in accordance with safety
standards.
Adhere to the following.
Warning
The device may only be used for the individual applications included in the catalog and
technical description. When used with devices and components of other manufacturers,
these devices and components must be approved or recommended by Siemens.
Correct and safe operation of the product is dependent on proper transportation, storage,
setup and installation and careful operator control and maintenance.
SIMATICR is a registered brand of SIEMENS AG.
The other designations in this publication may be brands whose use by third parties may
violate the rights of the owners.
Disclaimer of liability
Although we have checked the contents of this manual for agree-
ment with the hardware and software described, full agreement can-
not be guaranteed. The information in this manual is checked at
regular intervals and necessary corrections included in the next
release.Your ideas and suggestions are welcome.
E Siemens AG 1997- -2000
Subject to change without prior notice
Advertisement
Table of Contents
