Table of Contents
Advertisement
Commissioning
Module
address (for
use of
the IM 308-C)
Table 3-8
Possible addresses
1)
CM35 number
Possible CM35 addresses
CM35 number
Possible CM35 addresses
CM35 number
Possible CM35 addresses
1)
A fixed relationship between CM35 number and address does not exist. A maximum of 24 CM35 modules can be ad-
dressed per IM 308- -C interface.
Module
address (for
use of
the S5-95U/DP)
Table 3-9
Possible addresses
CM35 number
Possible CM35 addresses
3-20
The same start address is used for the input area and for the output area. The
CM35 module occupies 16 bytes in the input area and 16 bytes in the output
area. The module address must be a whole number multiple of 16. The start
address is also required for configuration under COM PROFIBUS.
Addressing in the process image (PY0 to PY127) should never be used for
consistent data.
P:
128
Q:
17
Q:
128
Input/output bytes 64 to 127 are used for both the local I/O (e.g., analog in-
put/output modules, slots 0 to 7) and the distributed I/O (DP slaves). When
the local I/O is used (e.g., analog input/output modules), the address areas
must be reserved in the host parameters by the user with COM PROFIBUS.
P:
64
1
2
3
4
144
160
176
9
10
11
12
0
16
32
48
18
19
20
144
160
176
1
2
3
4
80
96
112
(4) J31069-D0416-U001-A5-7618
5
6
7
8
192
208
224
240
13
14
15
16
64
80
96
112
21
22
23
24
192
208
224
240
5
6
7
8
128
144
160
176
CM35 Counter Module
Advertisement
Table of Contents
