Siemens SIMATIC CM35 Manual page 4

Foreword
Purpose of this
manual
Contents of this
manual
Target readers
Area of validity of
this manual
Hardware and soft-
ware prerequisites
for this manual
Additional source
of information
CM35 Counter Module
(4) J31069-D0416-U001-A5-7618
This manual describes all steps required for the effective use of the CM35
counter module. It presents the functionality of the CM35 concisely and log-
ically while you are familiarizing yourself with the module.
This manual describes the hardware and software of the CM35. It provides an
introduction and can also be used as a reference work.
This manual has been written for the following circles of readers.
Maintenance personnel
S
Programmers
S
Commissioning personnel
S
Service personnel
S
This manual describes the functions of the CM35 counter module as they
were at the time this manual was published. We reserve the right to modify
the functionality of the CM35. These changes will be described in product
information sheets.
This manual describes:
The CM35 counter module (order no. 6AT1 735-0AA01-0AA0)
S
The configuration package (order no. 6AT1 735-0DA01-0YA0)
S
If you are using the previous version of the CM35 counter module (order no.
6AT1 735-0AA00-0AA0), please use the configuration package with the or-
der number 6AT1 735-0DA00-0YA0.
Caution:
The CM35 counter module (order no. 6AT1 735-0AA01-0AA0) is not com-
patible with the CM35 counter module (order no. 6AT1 735-0AA00-0AA0).
The appendix lists additional sources of information on the subject of
SIMATIC S7- - 300.
i