Table of Contents
Advertisement
IM 153-2
SIMATIC S7-400H
and active back-
plane bus,
SIMATIC PCS 7
CM35 Counter Module
(4) J31069-D0416-U001-A5-7618
Prerequisites for the coupling are an IM 153- - 2 (MLFB no. 6ES7
153- - 2AA01- - 0XB0, release status 2 or later) and CM35 modules (MLFB no.
6AT1 735- - 0AA01- - 0AA0).
CM35 modules (MLFB no. 6AT1 735- - 0AA01- - 0AA0, release status 4 or
later) are required for the IM 153- - 2 interfaces (MLFB no. 6ES7
153- - 2AA02- - 0XB0, release status 5 or later).
Up to 7 CM35 modules can be connected to each IM 153- - 2 interface.
Exception:
Maximum of one CM35 per IM 153- - 2 when distributed
connection to a SIMATIC S5- - 95U/master DP is used
Maximum of 8 CM35s per IM 153- - 2 when distributed
connection to a SIMATIC S7 (CPU 318- - 2 DP,
CPU 417- - 4 DP, CP 443- - 5 Ext., IM 467) is used.
The present version of the CM35 does not support:
The setup with active bus modules for ET 200M
S
Use on high- - availability programmable controllers with redundant setup
S
(SIMATIC S7-400H)
Use with SIMATIC PCS 7
S
For additional information, contact the SIMATIC hotline.
Product Overview
1-5
Advertisement
Table of Contents
