Structure Of The Parameter Blocks - Siemens SIMATIC CM35 Manual

Positioning Operating mode
8.2.2

Structure of the Parameter Blocks

8-10
Tables 8-3 and 8-4 list the data structures of the nine parameter subblocks
which were combined into two parameter blocks. Each parameter subblock
must be transferred separately to the CM35 with an SFC 55 call.
The first word in the parameter subblocks contains the control word. The
required assignment is entered as an initial value in the structures.
Adhere to the information in chapter 4.2 concerning transmission.
CM35 Counter Module
(4) J31069-D0416-U001-A5-7618