Table of Contents
Advertisement
1. Check that the cable is connected properly at both ends.
2. If the problem is still not solved, replace the cable.
Use an ethernet cable, RJ45.
Related information
• 9.2.2 Cleaning the pressure tube and hose
12.12 The pumps start randomly
•
No alarm
Cause
Automatic test run 24 hours af-
ter last operation.
Related information
• 9.2.2 Cleaning the pressure tube and hose
Multilift MD1, MDV | Fault finding the product| 44
Remedy
No action necessary. It is a safety function that prevents the
shaft seal from seizing up.
Advertisement
Table of Contents
