Setting The Maintenance Interval; Setting Of Manual Or Automatic Resetting Of Alarms; Resetting The Controller To The Factory Settings - Grundfos Multilift MD1 Installation And Operating Instructions Manual

8.1.6 Setting the maintenance interval

1. Go to the settings menu.
2. Press OK.
3. Go to menu M_01.
4. Press OK.
5. Press arrow right or left to select the interval:
• 0 months
• 3 months
• 6 months
• 12 months.
6. Press OK.

8.1.7 Setting of manual or automatic resetting of alarms

1. Go to the settings menu.
2. Press OK.
3. Go to menu A_01.
4. Press OK.
5. Press arrow right or left to select how to reset alarms:
• MAN
• AUTO.
6. Press OK.

8.1.8 Resetting the controller to the factory settings

1. Go to the settings menu.
2. Press OK.
3. Go to menu G_01.
4. Press OK.
When you have reset the controller, the startup wizard starts.
Multilift MD1, MDV | | 33