Table of Contents
Advertisement
5.4.5 Menus
There are two menus in the controller:
•
settings menu
•
information menu
Settings menu
Menu
L_01
I_02
T_01
T_02
T_03
M_01
A_01
G_01
Exit
Information menu
Menu
F_01
R_01
R_02
R_03
Exit
5.4.6 Factory settings
Function
Start level
Rated current
Stop delay
Start delay
Alarm delay
Maintenance interval 0 months
Designation
Start level
Rated current
Stop delay
Start delay
Alarm delay
Maintenance interval
Resetting of alarms
Resetting to factory settings
Exit
Designation
Fault log
Hours counter [h]
Impulse counter
Motor current [A]
Exit
Factory setting
Not set from factory.
Not set from factory; to be set according to the motor nameplate.
1 second
0 seconds
5 seconds
Multilift MD1, MDV | | 23
Description
Set the start level in this menu.
Set the rated current.
Set a stop delay for the pumps.
Set a start delay for the
pumps.
Set an alarm delay for the sys-
tem.
Set the maintenance interval to
0, 3, 6 or 12 months. To disa-
ble the function, set the interval
to 0 months.
Select manual or automatic re-
setting of alarms.
-
Go back to the main menu.
Description
The fault log shows the latest
20 faults.
The hours counter shows the
number of operating hours.
The impulse counter shows the
number of starts.
The motor current is the aver-
age of the last 20 measure-
ments.
Go back to the main menu.
Advertisement
Table of Contents
