Baxi NUVOLA 28 Fi Installers And Users Instructions page 25

To change the characteristic curve or
zero point for the heating curves, it
is necessary to open the instrument
panel, as shown.
The adjustment is made by means
of buttons 4.1 and 4.2
However, if a remote control is
connected, potentiometers 4.1 and
4.2 do not function.
4.1
Adjustment of the
flow temperature
depending on the
outdoor tempera-
ture.
The higher the
number, the
higher the tempe-
rature.
COVER FOR CONTROL PANEL
LÅG TIL KONTROLPANEL
CONTROL PANEL
KONTROLPANEL
Figure 8 - Figur 8
The picture shows the 2 potentiometers 4.1 and 4.2.
Billedet viser de 2 potentiometre 4.1 og 4.2
4.1 (Parallel displacement)
4.1 (Parallelforskydning)
4.2 (Changing the curve gradient)
4.2 (Ændring af kurvehældning)
4.1
Justering af
fremløbs-
temperaturen
afhængig af ude-
temperaturen.
Stigende tempe-
ratur ved højere
tal.
PRINTED CIRCUIT BOARD
PRINTKORT
25
921.968.2.00.02.010702
Factory setting 4
Fabriksindstilling 4
Factory setting 5
Fabriksindstilling 5
4.2
Adjustment of the
characteristic cur-
ve of the flow
t e m p e r a t u r e
depending on the
outdoor tempera-
ture.
The higher the
number, the
higher the tempe-
rature.
CABLES FROM OUTSIDE PROBE
KABLER FRA UDEFØLER
M1
MODULATION CARD
MODULATIONSKORT
For at ændre karakteristik eller
nulpunkt for varmekurverne skal
instrumentpanelet åbnes som vist.
Indstillingen udfores på knap 4.1 og
4.2.
Når der er tilsluttet en fjernbetjening
er potentiometer 4.1 og 4.2 dog ude
af funktion.
4.2
Justering af
fremløbstemperatur-
ens karakteristik
afhængig af ude-
temperaturen.
Stigende tempe-
ratur ved højere
tal.
HEATING CURVES
VARMEKURVER