Baxi Ecogen 24/1.0 User Operating Instructions Manual
Baxi Ecogen 24/1.0 User Operating Instructions Manual

Baxi Ecogen 24/1.0 User Operating Instructions Manual

Gas fired wall mounted condensing boiler and power generator

Advertisement

User's Operating Instructions &
Important Warranty Information
Ecogen 24/1.0
Gas Fired Wall Mounted Condensing Boiler
and Power Generator
Please keep these instructions in a safe place.
If you move house, please hand them over to the next occupier.
© Baxi Heating UK Ltd 2011

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Ecogen 24/1.0 and is the answer not in the manual?

Questions and answers

Summary of Contents for Baxi Ecogen 24/1.0

  • Page 1 Important Warranty Information Ecogen 24/1.0 Gas Fired Wall Mounted Condensing Boiler and Power Generator Please keep these instructions in a safe place. If you move house, please hand them over to the next occupier. © Baxi Heating UK Ltd 2011...
  • Page 2: Table Of Contents

    Benchmark is managed and promoted by the Heating and Hotwater Industry Council. For more information visit www.centralheating.co.uk © Baxi Heating UK Ltd 2011 All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, or stored in any...
  • Page 3: Quick Reference Guide

    Standby - Appliance ON/OFF (OFF = Frost Protection) Outdoor Sensor Connected Text 1 Text 2 System / Appliance Attention Required Text 3 Maintenance / Special Mode Change Battery (only if wireless control fitted) Display showing all available segments © Baxi Heating UK Ltd 2011...
  • Page 4: Introduction

    See section 13.3. 5. It is your responsibility to contact your electricity supplier and inform them that you have installed a Baxi Ecogen which will generate electricity. This is a legal requirement (see Section 13.3). 6. Operation and control is similar to a domestic boiler and is fully automatic.
  • Page 5: The Programmers

    Communication Status 1st Yellow Engine Burner On 2nd Yellow Supplementary Burner On Reset Button Fault Present 2. The Reset Button may be used to reset User Errors - see Section 5 LED Receiver 11.0. © Baxi Heating UK Ltd 2011...
  • Page 6: Setting The Time

    Button to the required year. Set time and date Set time and date Year 2008 Year 2009 STEP 11 Press the MENU button twice to return to normal display screen. 03. June 2009 11:30 Wednesday © Baxi Heating UK Ltd 2011...
  • Page 7: Setting The Central Heating Times

    ‘Time setting 1’. Press Button to select and the screen goes back Time central heating CH1 Time central heating CH1 Mon - Sun Mon - Sun: 1st Time ON to STEP 6. Set to Time setting 1 06:00 © Baxi Heating UK Ltd 2011...
  • Page 8 Press the Button to Mon - Sun: 3rd Time ON Mon - Sun: 3rd Time OFF 17:00 23:00 select. STEP 17 Press the MENU button twice to return to normal display screen. 03. June 2009 11:30 Wednesday © Baxi Heating UK Ltd 2011...
  • Page 9: Setting The Dhw Times

    ‘Time setting 1’. Press Button to select and the screen goes back Time hot water Time hot water to STEP 6. Mon - Sun Mon - Sun: 1st Time ON Set to Time setting 1 06:00 © Baxi Heating UK Ltd 2011...
  • Page 10 Press the Button to Mon - Sun: 3rd Time ON Mon - Sun: 3rd Time OFF 17:00 19:30 select. STEP 17 Press the MENU button twice to return to normal display screen. 03. June 2009 11:30 Wednesday © Baxi Heating UK Ltd 2011...
  • Page 11: Mode Selection/Temp Adjustment

    Press the Selector Button to select and scroll to select the maximum time in minutes. NOTE: Press the MENU button twice to return to normal Press the Selector Button to confirm your choice. display screen. © Baxi Heating UK Ltd 2011...
  • Page 12 Turn the Selector Button to change the temperature to the desired temperature. Press the Selector Button to confirm. The maximum setpoint temperature is 65°C The main screen will return after a short while, otherwise press the menu button to return immediately. © Baxi Heating UK Ltd 2011...
  • Page 13 This facility may be used to heat the house outside the programmed periods. 5. The reduced temperature setting will revert to the permanently stored value at the beginning of the next programmed period. © Baxi Heating UK Ltd 2011...
  • Page 14 Easy Menu and Selector Button untill ‘Programming temporarily unlock’ appears. Repeat the procedure for Programme lock untill ‘Programming lock’ is highlighted, turn the Selector Button to show Off and press to confirm. Operator section Programming lock © Baxi Heating UK Ltd 2011...
  • Page 15: Contents Of Other Functions

    ‘Diagnostics engine’ by pressing the Selector Button. 9. Copy to - Monday/Tuesday/Wednesday/Thursday/Friday/Saturday/Sunday. 1. Power – W 2. Energy to date – kWh 3. Energy since reset - kWh 4. Reset energy counter - no / yes © Baxi Heating UK Ltd 2011...
  • Page 16: Resetting The Boiler

    266:Fan Fault presence of a service engineer. When ringing the Heateam Service Department to request a service engineer please quote the error code and accompanying message. © Baxi Heating UK Ltd 2011...
  • Page 17: Clearance

    Your installer 450mm Min should have insulated any exposed pipework. For Servicing Purposes 5mm Min 426mm In Operation © Baxi Heating UK Ltd 2011...
  • Page 18: Error Codes

    Maximum flow temperature rise exceeded, automatic reset after 10 minutes AR 10’ • After 10 minutes or after down power (ARP) + Will clear message if 65°C is achieved - does not inhibit appliance on. © Baxi Heating UK Ltd 2011...
  • Page 19 263 and 264 when the appliance must be switched off and on again to enable a restart. All other error codes indicate a fault condition, which will require the attention of a service engineer. © Baxi Heating UK Ltd 2011...
  • Page 20: Care Of The Boiler

    Turn off the gas supply at the meter Warn any other occupants and vacate the premises Telephone the National Gas Emergency Service on:- 1. The appliance MUST be serviced annually by a Baxi 0800 111 999 authorised engineer. 2. Before electrically isolating the appliance: remove all demands Faulty boiler for heat and ensure the engine has disconnected from the grid.
  • Page 21: Legislation

    If your electricity meter does not already register reverse flows then the provider will have to arrange for new metering. © Baxi Heating UK Ltd 2011...
  • Page 22: Notes

    14.0 Notes © Baxi Heating UK Ltd 2011...
  • Page 23 14.0 Notes © Baxi Heating UK Ltd 2011...
  • Page 24 A T r a d i n g D i v i s i o n o f B a x i H e a t i n g U K L t d ( 3 8 7 9 1 5 6 ) Brooks House, Coventry Road, Warwick. CV34 4LL After Sales Service 0844 871 1525 Technical Enquiries 0844 871 1555 Website www.baxi.co.uk e&oe UK Comp N 5133684 - Iss 03 (12/11) © Baxi Heating UK Ltd 2011...

This manual is also suitable for:

Ecogen 24/1.0 lpgEcogen 24

Table of Contents