Table of Contents
Advertisement
Manual Operation:
To operate the control without the use of pre-set programs, follow the instructions listed below.
1. Turn the oven on by pressing the "Power" button. The oven will automatically start preheating
to the last set temperature.
2. Press either the up or down arrows until manual program is displayed.
3. Press the "Program" button; this will display the events window where time, temp, steam, vent,
and pulse can be set.
4. Press the "Select" button to move between functions and the up and down arrows to change the
settings.
5. Set the desired tier cooking time by using the up or down arrows and then the "Select" button, to
advance to the temperature setting.
6. Enter the desired temperature using the up or down arrows and then the "Select" button, to
advance to the Steam setting.
7. If you desire to steam in the first tier enter the time you would like to steam for, using the up or
down arrows, for a maximum of 60 seconds. Press the "Select" button; to advance to the Vent
setting.
8. If the vent is to be open for a period of time there are two methods to do this. Either press the
"Vent" button during the count down cycle when the vent is to be open and then press it again to
close it, or the other method requires that a separate tier be set up. To do this press the "Select"
button until the time for the second tier is highlighted, using the up or down arrow keys select a
time that the vent is to be open. Press the "Select" button until the Vent is highlighted. Press the
up or down arrows until "o" is displayed. This will open the vent for the total time set for tier.
9. If the vent does not need to be opened press the "Select" button until BL is highlighted, then
using the up or down arrows to select either "—" (fan on), "d" (fan delay), or "p" (pulse fan). If
"—" is selected then the fan will run continuously through the tier, if "d" is selected then the fan
will be off for the duration of the cook tier, and if "p" is selected then the computer will ask for a
on and a off time and pulse the fan for the duration of the tier.
10. Once the program has been set load the oven and select "Run"
11. The oven will run the program and then beep continuously.
ETL File 3028821
16
PROGRAMMING
Rev. A 2002
Advertisement
Table of Contents
