Chapter 4. Setting Of Software; Open Software - Novusun CNC NVUM_SPv1.1 Manual

Chapter 4.

4.1 Open software

Double-click the mach3mill
Enter mach3 software. Pop-up the plug-in dialog box. See as Figure 4-1.
Choose our plugin NVUM_SP_Novusun-PlugIn---Ver-
want to the dialog box appear again next time, you can select Don't ask me this again.If connect
successfully,Status bar will show "NVUM_SP device is connected to your computer". See as
Figure4-2.
Manual of NVUM_SP
Setting of software
。
Figure4-1. Plugin selection dialog
connect successfully
Figure4-2.
- 22 -
www.nvcnc.com
2.0a Then press OK. If you do not
。