Leak Stop Valve Installation - Ispring RCC7 Installation Instructions & Owner's Manual

Leak Stop Valve Installation

The Leak Stop Valve is a reusable mechanical leakage protector. When the pulp detects water
leakage, it will expand and shut down the feed water. Before connecting the tubing into the fitting,
make sure the end of the tubing is cut square and not damaged or scratched.
Replace expanded pulp
Congratulations, you have successfully installed your
iSpring Reverse Osmosis Water Filtration System!
Start enjoying fantastic reverse osmosis water right from your tap!
End of Installation Section
------------------------------------- ------------------------------------
Page 13www.123filter.com | (678) 261-7611 | Support@123Filter.com