Menu Display Time; Source Select - Sun Microsystems Computer Monitor Owner's Manual

Menu Display Time

OSD
Menu Display Time
5 10 20
Menu Display Time
5 10 20

Source Select

Source Select
Auto
64.0kHz 60Hz PP
1280 x 1024
Analog
Copyright(c) 2004, Sun Microsystems, Inc. All rights reserved.
The menu will automatically turn off if no adjustments
are made for a certain time period.
You can set the amount of time the menu will wait before
50 200
it turns off.
(Seconds)
1. Push the Menu button.
2. Push the [-] button or [+] button until the Menu Display
3. Push the Menu button to open the Menu Display Time
4. Use the[-] or [+] buttons to select 5, 10, 20, 50, 200 seconds.
50 200
(Seconds)
Select Auto Source Select for the monitor to automatically
select the signal source. Select Manual Source Select to
Manual
manually select the signal source using the Source
button.
You can see the frequency, the polarity of the operational
signals and the resolution level.
1. Push the Menu button.
2. Push the [-] button or [+] button until the Source Select
3. Push the Menu button to open the Source Select selection
4. Use the [-] button or [+] button to select Auto or Manual.
How to adjust
Menu Display Time
Time screen is displayed.
selection screen.
20 seconds is the default value.
Source Select
screen is displayed.
screen.
User's Manual - 15
On-Screen Display