ProMinent EXtronic EXBb Operating Instructions Manual page 10

Safety chapter
Isolating protective equipment
Other safety equipment
10
CAUTION!
Warning of personal injury and material damage
– Feed chemical may spray out of the hydraulic
components if they are tampered with or
opened due to pressure in the liquid end and
adjacent parts of the system.
– The metering pump may generate a multiple of
its rated pressure. Hydraulic parts may rupture
if a discharge line is blocked.
– An unsuitable feed chemical may damage the
parts of the pump that come into contact with it.
– The use of untested third party components
may result in injury to personnel and material
damage.
– Danger may result from a poorly accessible
pump due to incorrect operation and poor
maintenance.
– The metering behaviour of the pump changes if
a different liquid end size is fitted.
Only ProMinent Service may open the housing.
Adhesive labels
WARNING!
– The following safety information must be
affixed to pumps that contain parts made of
electrically non-conducting plastic.
– Ensure that the label is always fitted and
legible.
– The label should indicate that:
– plastic parts may only be wiped down care‐
fully with a damp cloth.
– the discharge line and suction line must
always be earthed before working on the
pump.
W a r n i n g
e l e c t ro s t a t i c ch a rg i n g h a z a r d
- se e i n st r u ct i o n s
Fig. 2
WARNING!
– The following safety information for ProMinent
Service needs to be adhered to the pump foot.
– Ensure that the label is always fitted and
legible.
P o t en t i a l