Intuicom RTK Bridge-X Installation Manual page 14

Section 2: Installation Instructions
 AgRemote's default correction source is TSIP and a baud rate of 38400. To change
this to CMR you will need to use the arrows to navigate the available options.
 Use the right arrow (>) to move the cursor over to the 'T' in TSIP.
 Click on the down arrow (v) to change the setting to CMR.
 Using the right arrow (>) again, scroll over to the 'T' in TSIP visible on the screen.
 Using the down arrow (v), change the setting to None.
 Press the ( ) button to save your settings, the cursor will disappear.
Version 1.0 13 Intuicom, Inc.