Bay Networks Remote Annex 4000 Hardware Installation Manual page 59

9 Run the Annex Installation Utility. At the prompt, start the Annex
Installation Utility by typing:
AMINSTAL
Enter
A window appears with selections for installing or upgrading
the software.
10 Select Install and press
The Annex Installation utility automatically lists any uninstalled
Annexes in the Uninstalled Annexes window.
11 Use the arrow keys or the mouse to highlight the Annex(es) to be
installed and select OK.
A list of available servers appears.
To install several Remote Annexes, select each
Remote Annex and press
12 Choose the server that contains the operational code that will be
downloaded to the Annex(es) and select OK.
A message appears when the installation is complete. If any
errors occur during the process, an error message window
appears.
13 Now you can run the Annex Manager, which configures the
Annex(es) and security. See the Annex Manager for DOS
Administrator's Guide for the PC for information about Annex
Manager.
If a Remote Annex 4000 boots from a Novell server, the Remote
Annex is available for IPX dial-in and dial-out only. Other
Remote Annex 4000 features such as PPP, SLIP, ARAP, and CLI
are not supported.
Remote Annex 4000 Hardware Installation Guide
Chapter 2 Installing the Remote Annex 4000
.
Enter
.
Enter
2-21