Page 2
For Conduit - Remove knockout “A”, “B” or “C”. This double knockout accommodates either 1/2" or 3/4" conduit. For Surface Raceway - Remove knockout “D” or “E”. This opening accommodates PANDUIT LD10 surface raceway. 1.2 Determine the antenna type that will be used. Remove the appropriate knockouts.
Page 3
Step 6: Install Surface Mount Box 6.1 Run the network cable to and into the enclosure. 6.2 Terminate the Cat5e Jack Module to the network cable. Refer to the PANDUIT website for jack termination instructions if needed. 6 / 7 6.3 Mount the base of the 2 Position Surface Mount Box to...
Page 4
OPTIONAL FLUSH WALL MOUNT INSTALLATION The enclosure can be mounted flush with the surface of a wall when optional PanZone Wireless Access Point Ceiling Bracket Kit, PANDUIT Part# PZWIFICB (sold separately), is used. 1. Knockout Removal 1.1 Remove knockouts in desired cable entry location: For Conduit - Remove knockout “A”...
Page 5
Please read these instructions in their entirety prior to installing the enclosure. Note: PANDUIT Part Number PZWIFICB is required for the in-ceiling mount application. Step 1: Knockout Removal 1.1 Remove knockouts in desired cable entry location:...
Page 6
INSTALLATION INSTRUCTIONS PN355 Step 3: Install Ceiling Mount Brackets PANDUIT Part #: (sold separately) PZWIFICB - PanZone Wireless Access Point Ceiling Bracket Kit (4) Ceiling Mount Brackets (16) #6-32 Flat Head Screws 3.1 Place one of the Ceiling Mount Brackets against any side wall of the enclosure with the flanged edge facing away from the enclosure.
Page 7
Cat5e jack cannot be removed through a 1/2" conduit knockout. 8.2 Terminate the Cat5e Jack Module to the network cable. Refer to the PANDUIT website for jack termination instructions if needed. 8.3 Mount the base of the 2 Position Surface Mount Box to the back wall of the enclosure using provided double sided tape.
Page 8
Slot Cover. 11.2 Place the Slot Cover over the two threaded studs and secure with the #10 Split Lock Washers and #10-32 Hex Nuts. E-mail: For Instructions in Local Languages cs@panduit.com and Technical Support: Fax: www.panduit.com/resources/install_maintain.asp www.panduit.com (708) 444-6993...