Concealed cistern for floor-standing wc 8 cm (22 pages)
Summary of Contents for Viega Eco Plus 8152.4
Page 1
Viega Eco Plus urinal element siphon sensor technology Instructions for Use for urinal with siphon sensor technology Model Year built: 8152.4 from 06/2015 en_INT...
Page 2
Viega Eco Plus urinal element siphon sensor technology 2 from 16...
This restriction does not extend to possible operating instructions. The installation of Viega products must take place in accordance with the general rules of engineering and the Viega instructions for use.
German/European directives specified in this manual: The information herein is not binding for other countries and regions; as said above, they should be understood as a recommendation. Viega Eco Plus urinal element siphon sensor technology 5 from 16...
Intended use 2.2.1 Areas of use The Viega Eco Plus urinal element "siphon sensor technology" is suit- able for mounting on masonry wall constructions and support profiles pursuant to the regulations in section Ä „Regulations from section: Fields of application / Mounting conditions“ on page 6 .
2.3.2 Compatible components The urinal element is compatible with the equipment set "Siphon sensor technology" model 8352.2. It is suitable for all ceramics with a horizontal connection. Viega Eco Plus urinal element siphon sensor technology 7 from 16...
11 mm frame construction Maximum height of urinal inlet 880 mm from upper edge of the finished floor Accessories Required accessories The fixing set model 8173 is required to secure. Viega Eco Plus urinal element siphon sensor technology 8 from 16...
Actuation The urinal element can be extended with the equipment set "Siphon sensor technology", model 8352.2. 3.1.2 Installation dimensions Urinal element Fig. 2: Dimensions Viega Eco Plus urinal element siphon sensor technology 9 from 16...
> 490 mm. Observe the instructions for use of the support bracket when mounting. Determine and mark fixing points. X1: 390 mm (model 8180.73) X2: 440 mm (model 8173) X3: 1100 mm Ø10 0 - 2 0 Viega Eco Plus urinal element siphon sensor technology 10 from 16...
Page 11
Set the installation depth of the pre-wall element with the fork spanner (size 17). 0 - 2 0 Attach urinal element to the floor using the fork spanner (size 13) and the screws and dowels supplied. Viega Eco Plus urinal element siphon sensor technology 11 from 16...
Page 12
Mount threaded bolts. . 3 9 0 m a x Seal double nipple from one side. Screw double nipple into the wall plate. Secure water inlet onto the double nipple. Viega Eco Plus urinal element siphon sensor technology 12 from 16...
Page 13
The urinal element can be installed in support profiles of 50 mm and 75 mm. Determine the fixing points. Align element. Mount drain elbow, double nipple and water inlet. Viega Eco Plus urinal element siphon sensor technology 13 from 16...
Page 14
There are only limited possibilities available to remedy errors Ä „Construction height“ made during this assembly step, 0 - 2 0 on page 9 . Screw the urinal element together laterally with the support profiles. Viega Eco Plus urinal element siphon sensor technology 14 from 16...
Page 15
0 - 2 0 0 If necessary, swap the installation set with the mounting bracket and the crossbeam of the threaded bolts with each other. Mount drain elbow, double nipple and water inlet. Viega Eco Plus urinal element siphon sensor technology 15 from 16...
8352.2 and of the urinal. Disposal Separate the product and packaging materials (e. g. paper, metal, plastic or non-ferrous metals) and dispose of in accordance with valid national legal requirements. Viega Eco Plus urinal element siphon sensor technology 16 from 16...