Appendix B.3 Securing Protoair With Passwords; Figure 30: Fs-Gui Passwords Page; Figure 31: Password Recovery Page - Siemens ProtoAir FPA-W44 Startup Manual
For interfacing siemens products: fc410, mag6000, mass6000, fst030, to building automation systems and smc cloud: bacnet ms/tp, bacnet/ip, modbus tcp/ip and ethernet/ip
Table of Contents
Advertisement
Appendix B.3 Securing ProtoAir with Passwords
Access to the ProtoAir can be restricted by enabling a password on the FS-GUI Passwords page – click
Setup and then Passwords in the navigation panel. There are 2 access levels defined by 2 account
names: Admin and User.
•
The Admin account has unrestricted access to the ProtoAir.
•
The User account can view any ProtoAir information but cannot make any changes or restart the
ProtoAir.
The password needs to be a minimum of eight characters and is case sensitive.
If the password is lost, click cancel on the password authentication popup window, and email the password
recovery token to technical support to receive a temporary password from the customer support team.
Access the ProtoAir to set a new password.
Figure 30: FS-GUI Passwords Page
Figure 31: Password Recovery Page
Page 40 of 66
Siemens ProtoAir Start-up Guide
Advertisement
Table of Contents
