Protoair Setup; Record Identification Data; Point Count Capacity And Registers Per Device; Figure 1: Protoair Part Numbers - Siemens ProtoAir FPA-W44 Startup Manual

For interfacing siemens products: fc410, mag6000, mass6000, fst030, to building automation systems and smc cloud: bacnet ms/tp, bacnet/ip, modbus tcp/ip and ethernet/ip
Table of Contents

Advertisement

3

PROTOAIR SETUP

3.1

Record Identification Data

Each ProtoAir has a unique part number located on the side or the back of the unit. This number should be
recorded, as it may be required for technical support. The numbers are as follows:
FPA-W44 units have the following 3 ports: RS-485 + Ethernet + RS-485
3.2

Point Count Capacity and Registers per Device

The total number of registers presented the device(s) attached to the ProtoAir cannot exceed:
FC410
MAG6000
MASS6000
FST030
Model
ProtoAir

Figure 1: ProtoAir Part Numbers

Part number
FPA-W44-1762

Figure 2: Supported Point Count Capacity

Devices

Figure 3: Registers per Device

Page 9 of 66
Siemens ProtoAir Start-up Guide
Part Number
FPA-W44-1762
Total Registers
1,500
Registers Per Device
70
150
192
983

Advertisement

Table of Contents
loading

Table of Contents