Cleaning And Care; Unsuitable Cleaning Agents - Miele H 7840 BM Operating And Installation Instructions

Cleaning and care


Risk of injury caused by hot
surfaces.
The oven gets hot during operation.
You could burn yourself on the
heating elements, the oven
compartment, or accessories.
Allow the heating elements, oven
compartment and the accessories to
cool before manual cleaning.

Risk of injury due to electric
shock.
The steam from a steam cleaning
appliance could reach electrical
components and cause a short
circuit.
Do not use a steam cleaner to clean
the oven.
The use of unsuitable cleaning
agents can cause the surfaces to
discolour or alter. The oven front is
particularly susceptible to damage
from oven cleaners.
All surfaces of this appliance are
susceptible to scratching. Scratches
on glass surfaces could cause a
breakage in certain circumstances.
Remove all cleaning agent residues
immediately.
Stubborn soiling could damage the
oven in certain circumstances.
Once the oven has cooled, clean the
oven compartment, the inside of the
door and the door seal. Waiting too
long can make cleaning
unnecessarily difficult and in some
cases impossible.
104
Operating a damaged oven can
result in microwave leakage and
present a hazard to the user.
Check the door and door seal for any
sign of damage. If any damage is
noticed, the oven should not be used
again with microwave functions until
the fault has been rectified by a
service technician.

Unsuitable cleaning agents

To avoid damaging the surfaces of your
appliance, do not use:
– cleaning agents containing soda,
alkalines, ammonia, acids or
chlorides
– cleaning agents containing descaling
agents on the oven front
– abrasive cleaning agents, e.g.
powder cleaners and cream cleaners
– solvent-based cleaning agents
– stainless steel cleaning agents
– dishwasher cleaner
– glass cleaning agents
– cleaning agents for ceramic cooktops
– hard, abrasive brushes or sponges,
e.g. pot scourers, brushes or
sponges which have been previously
used with abrasive cleaning agents
– dirt erasers
– sharp metal scrapers
– steel wool or metal scourers
– spot cleaning with mechanical
cleaning agents
– Oven cleaners *
– stainless-steel spiral pads
* These can, however, be used to
remove very heavy soiling from
PerfectClean treated surfaces