Table of Contents
Advertisement
The VIPer 821 provides a dual USB port through the J17 USB connector. To conform to
the standard USB requirements, a USB adapter cable is required.
SETUPS
Related Jumpers
No jumper setting is required.
BIOS Level
To assign an IRQ to the USB port refer to the PnP / PCI Configuration option.
To connect an USB keyboard, run the BIOS Setup Program, Chipset Features option, and
enable the USB keyboard support. This option is only supported at the BIOS and DOS level.
MAKING CONNECTIONS
MORE ...
Each channel's supply pin is protected by a self-resetting 1A fuse.
A 10-pin header/Dual USB adapter cable with bracket is
available from TEKNOR and is referred to as #150-316.
3-21
- Quick Links:
- Standard Cmos Setup
Hide quick links:
Advertisement
Table of Contents
