Teknor Industrial Computers VIPer 821 Technical Reference Manual page 36

 ,  

  ,  
  ,  
  ,  

A CompactFlash disk consists of a CompactFlash device and a CompactFlash module that
supports it.
The CompactFlash module connects to the board through the J12 CompactFlash connector.
SETUPS
Related Jumpers
No jumper setting is required.
BIOS Level
Since the CompactFlash disk is IDE compliant it requires no software driver. It is tied directly
to the Secondary IDE interface.
The CompactFlash disk specifications are automatically detected at the BIOS level – Standard
CMOS Setup .
MAKING CONNECTIONS
The CompactFlash assembly and mounting are presented below:
MORE ...
The CompactFlash disk is bootable as a standard IDE disk unit. To select the boot sequence,
refer to Section 4 – BIOS Features Setup .

   


+- +- +- +-
3-14