Hardware Controls - Antelope Discrete 4 Synergy Core User Manual

14. DC Power Connection
Only for use with the Antelope Audio DC power supply!
15. Kensington Lock
Used to lock down the device in demonstration rooms.

2.3 Hardware controls

Function Button 1 (top-most)
• Pressing Function Button 1 cycles through Monitor Volume, Line Out Volume, and Headphone Output (HP) 1 –
4 Volume. Use the rotary control to adjust volume.
• Press and hold Function Button 1 to access the Discrete 4 Synergy Core System Menu (explained below).
Use the rotary control to select an entry in the menu. Press the rotary control to enter the selected sub-menu.
Turn the rotary control left or right to adjust the setting.
• Press the rotary control to toggle Monitor Volume Mute On/Off.
• Press any of the function buttons to exit.
Discrete 4 Synergy Core System Menu
1. Comm. Interface: Switch between USB and Thunderbolt™ mode. Use the appropriate setting for your connection.
2. Device Info: Shows the following information: Serial Number, Hardware Revision, Firmware Version.
3. Scr Save Time: Adjusts the length of time before the screensaver turns on. The following options are available: Off,
2 min, 5 min, 15 min, 30 min, 60 min, 120 min.
4. Scr Save Style: Lets you choose the screensaver style. The following choices are available: Star & Black. Press the
rotary control in to confirm.
5. Factory Reset: Lets you restore factory presets. Useful for troubleshooting the Discrete 4 Synergy Core. Be careful,
pressing the rotary control activates the function instantly, without asking for confirmation.
3. Software