Suzuki Jimny Manual page 92

BEFORE DRIVING
Clock
The display (B) shows the time.
To change the time indication:
1) Push the trip meter selector knob (1)
and the indicator selector knob (2)
together.
2) To change the hour indication, turn the
indicator selector knob (2) left or right
repeatedly when the hour indication
blinks. To change the hour indication
quickly, turn and hold the indicator
selector knob (2). To set the hour indi-
cation, push the indicator selector knob
(2) and the minute indication will blink.
3) To change the minute indication, turn
the indicator selector knob (2) left or
right repeatedly when the minute indi-
cation blinks. To change the minute
indication quickly, turn and hold the
indicator selector knob (2). To set the
minute indication, push the indicator
selector knob (2).
To select 12/24H format, refer to "Setting
mode" in this section.
WARNING
If you attempt to adjust the display
while driving, you could lose control
of the vehicle.
Do not attempt to adjust the display
while driving.
2-19
Thermometer
The display (A) shows the thermometer.
The thermometer indicates the outside
temperature.
78RB02089
If the outside temperature drops to freez-
ing condition, the mark (a) will appear on
the display.
NOTE:
• The outside temperature indication is not
the actual outside temperature when
driving at low speed, or when stopped.
• If there is something wrong with the ther-
mometer, or just after the ignition switch
is turned to "ON" position, the display
may not indicate the outside tempera-
ture.
When the display (E) shows the driving
range, you can change the unit of tem-
perature.
To change the unit of temperature, while
pushing and holding the trip meter selector
knob (1), turn the indicator selector knob
(2).
(a)
Selector position (for Automatic
transmission vehicles) / Gearshift
indicator (if equipped) / Rear pas-
senger's seat belt reminder (if
equipped)
EXAMPLE
(Initial setting)
78RB02092
52RM21360
78RB1-01E