Suzuki Jimny Manual page 303

NOTE:
When selecting "Go Back" or pressing
BACK button (4), the previous menu will
be displayed.
Registration in speed dial
Follow the instructions below to assign a
number to one of PRESET buttons (3) to
use as the speed dial.
®
1) Press the Bluetooth setup button (5)
or (6).
®
The Bluetooth setup menu will be dis-
played.
2) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "Setup Telephone", and
press the knob (1) to determine the
selection.
3) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "Setup Phonebook", and
press the knob (1) to determine the
selection.
4) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "Add Speed Dial", and
press the knob (1) to determine the
selection.
5) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select the initial of the name you
would like to register in speed dial, and
press the knob (1) to determine the
selection.
The registered numbers will be dis-
played in sequence. If names have
been registered together with numbers,
the names will be displayed.
Turn "TUNE/FLD PUSH SOUND" knob
(1) to select the name you would like to
register in speed dial, and press the
knob (1) to determine the selection.
6) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "Choose Preset", and
press one of PRESET buttons (3) to
which the selected number is to be
assigned. If a number is already
assigned to the selected button, a con-
firmation message will be displayed.
Turn "TUNE/FLD PUSH SOUND" knob
(1) to select a confirmation message,
and press the knob (1) to complete the
assignment.
Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "Confirm", and press the
knob (1) to complete the assignment.
When the assignment is completed, the
"Setup Phonebook" will be displayed.
NOTE:
When selecting "Go Back" or pressing
BACK button (4), the previous menu will
be displayed.
OTHER CONTROLS AND EQUIPMENT
One-touch call (Speed dial)
Follow the instructions below to dial the
number assigned to each of the PRESET
buttons (3).
1) Press OFF HOOK button (7).
®
The Bluetooth phonebook menu will
be displayed.
Pressing one of PRESET buttons (3)
can skip step 2) and the 1st line of step
3).
2) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "Speed Dials", and press
the knob (1) to determine the selection.
3) Press one of PRESET buttons (3).
The assigned number will be displayed.
If no number is assigned, "No Entry" is
displayed.
4) Press OFF HOOK button (7).
The selected number will be dialed.
5-66
78RB1-01E