Suzuki Jimny Manual page 305

Selection of phone (Select Phone)
Follow the instructions below to select a
phone to be paired with from the registered
phones.
®
1) Press the Bluetooth setup button (5)
or (6).
®
The Bluetooth setup menu will be dis-
played.
2) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "Setup Bluetooth", and
press the knob (1) to determine the
selection.
3) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "List Phone", and press the
knob (1) to determine the selection.
4) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select a phone to be paired with,
and press the knob (1) to determine the
selection.
5) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "Select", and press the
knob (1) to determine the selection.
NOTE:
• When selecting "Go Back" or pressing
BACK button (4), the previous menu will
be displayed.
®
• The Bluetooth ready audio device will
be disconnected when the phone is
selected.
List of phones (List Phones)
Follow the instructions below to display the
names of the registered phones in
sequence.
®
1) Press the Bluetooth setup button (5)
or (6).
®
The Bluetooth setup menu will be dis-
played.
2) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "Setup Bluetooth", and
press the knob (1) to determine the
selection.
3) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "List Phone", and press the
knob (1) to determine the selection.
The names of the registered phones
are displayed in sequence.
NOTE:
When selecting "Go Back" or pressing
BACK button (4), the previous menu will
be displayed.
Passkey setting (Set Passkey)
Follow the instructions below to set the
security number (passkey).
®
1) Press the Bluetooth setup button (5)
or (6).
®
The Bluetooth setup menu will be dis-
played.
2) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "Setup Bluetooth", and
press the knob (1) to determine the
selection.
OTHER CONTROLS AND EQUIPMENT
3) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "Passkey", and press the
knob (1) to determine the selection.
4) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "Enter New Passkey", and
press the knob (1) to determine the
selection.
5) Press or turn "TUNE/FLD
SOUND" knob (1) to select "Confirm".
6) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select a number for the first digit,
and press the knob (1) to determine the
selection. Select and determine num-
bers for the second, third and fourth
digits in order in the same manner.
When not entering up to the eighth
digit, enter blanks for the successive
digits.
7) Press "TUNE/FLD PUSH SOUND"
knob (1) to determine the passkey set-
ting.
NOTE:
When selecting "Go Back" or pressing
BACK button (4), the previous menu will
be displayed.
PUSH
5-68
78RB1-01E