Suzuki Jimny Manual page 53

Hide thumbs Also See for Jimny:
Table of Contents

Advertisement

Install the ISOFIX type child restraint sys-
tem according to the instructions provided
by the child restraint system manufacturer.
After installation, try moving the child
restraint system in all directions especially
forward to check that connecting bars are
securely latched to the anchorages.
84MM00252
Your vehicle is equipped with the top
tether anchorages. Use the top tether strap
of the child restraint according to the
instructions provided by the child restraint
system manufacturer.
Here is a general instruction:
CAUTION
If your vehicle is equipped with the
head restraint, adjust the height of
the rear head restraint or remove it
for fitting the child restraint, as nec-
essary. However, if a booster cushion
not equipped with the head restraint
is fitted, the head restraint should not
be removed. If the head restraint is
removed for fitting the child restraint,
you need to install it again after
removing the child restraint.
If the child restraint is fitted improp-
erly, a child sitting in it could be
injured in a collision.
NOTE:
Stow the removed head restraint in the
luggage compartment so it will not cause
inconvenience to the occupants.
FOR SAFE DRIVING
1) Place the child restraint in the rear seat,
inserting the connecting bars to the
anchorages between the seat cushion
and the seatback.
78RB1-01E
78F114
1-34

Advertisement

Table of Contents
loading

Table of Contents