Suzuki Jimny Manual page 223

• If you stop the vehicle and turn the igni-
tion switch to "LOCK" position, and leave
it for 20 minutes or more, tyre pressure
will be reset and will be indicated as 0
kPa when the engine is restarted. In this
case, the current tyre pressure indication
will recover after driving for a while.
However, if any of tyre pressures has
been detected as low pressure before
stopping the engine, the tyre pressure
indication may not recover and may be
indicated as "---".
To set the initial value of tyre pressure
78RB03016
1) When the ignition switch is in "ON"
position and the vehicle is stationary,
push and hold the indicator selector
knob (1) on the instrument cluster for a
while to change the information display
to the setting mode.
OPERATING YOUR VEHICLE
(1)
2) Turn the indicator selector knob (1) left
or right to select "TPMS" and push the
indicator selector knob.
NOTE:
If you exit the setting mode, select "Back"
and push the indicator selector knob (1).
78RB03017
3-70
78RB1-01E