Suzuki Jimny Manual page 32

FOR SAFE DRIVING
WARNING
To minimize risk of severe injury or
death in the event of a collision,
always fasten seat belt with both
latches buckled.
1-13
Unlatching and latching detachable
connector
(1)
78RB02016
Unlatching
To unlatch the connector:
1) Insert a key into the slot (1) on the con-
nector and allow the belt to retract.
2) Once the belt has completely retracted,
stow the belt in the holder. Refer to
"Stowing rear lap-shoulder belt" for
details in this section.
Latching
To latch the connector:
1) Pull the belt out from the holder.
(2)
(3)
78RB02017
2) Insert the connector latch plate (2) into
the connector (3).
WARNING
Check that the detachable connector
is securely latched and the webbing
is not twisted.
78RB1-01E