Suzuki Jimny Manual page 371

(2) / (3) / (4) / (5)
(6)
(7)
78RB07038
(6) Removal
(7) Installation
3) To remove and install the bulb of the
brake/tail light (2), the rear turn signal
light (3), the reversing light (4), or the
rear fog light (5) (if equipped), simply
pull out or push in the bulb.
License plate light
(1)
52RM70070
1) Remove the cover (1) by turning it
counterclockwise.
INSPECTION AND MAINTENANCE
(2)
76MH0A126
2) To remove and install the bulb of the
license plate light (2), simply pull out or
push in the bulb.
High-mount stop light
LED is used. It is recommended that you
take your vehicle to a SUZUKI dealer for
bulb replacement since special procedures
are required.
78RB1-01E
6-52