Suzuki Jimny Manual page 308

Hide thumbs Also See for Jimny:
Table of Contents

Advertisement

OTHER CONTROLS AND EQUIPMENT
Registration of audio devices
®
To use Bluetooth
ready audio devices
with this unit, it is required to register the
devices.
NOTE:
• To set up a new audio player, disconnect
the phone from the unit. Connect the
phone after audio player setup is com-
pleted if necessary.
• When attempts to establish the pairing
fail within 60 seconds, the connecting
operation will be canceled. Try to estab-
lish the pairing again or refer to the audio
player manual for assistance with the
pairing process.
®
1) Press the Bluetooth
setup button (7)
or (8).
®
The Bluetooth
setup menu will be dis-
played.
2) Turn "TUNE/FLD PUSH SOUND" knob
(2) to select "Setup Bluetooth", and
press the knob (2) to determine the
selection.
3) Turn "TUNE/FLD PUSH SOUND" knob
(2) to select "Pairing", and press the
knob (2) to determine the selection.
4) Select "My Car" from the Bluetooth
menu of the audio player and establish
the pairing.
Refer to the manual of the audio player
in use for further information.
5) Enter the passkey displayed on the unit
to the audio player.
5-71
NOTE:
• When selecting "Go Back" or pressing
BACK button (6), the previous menu will
be displayed.
• When
registering
additional
devices, repeat Step from 1).
®
Selecting Bluetooth
audio mode
Press "MEDIA" button (1).
Each time the button is pressed, the mode
will change as follows:
USB (iPod
) (if equipped)
®
®
Bluetooth
audio (if equipped)
Selecting a group (only for supported
models)
Turn "TUNE/FLD PUSH SOUND" knob (2)
to select a group.
Selecting a track
• Press UP button (3) to listen to the next
track.
• Press DOWN button (4) twice to listen to
the previous track.
®
When DOWN button (4) is pressed
once, the track currently being played
will start from the beginning again.
Fast forwarding/rewinding a track
• Hold down UP button (3) to fast forward
the track.
• Hold down DOWN button (4) to fast
audio
rewind the track.
NOTE:
Some functions may not be available
®
depending on Bluetooth
audio.
Display change
Press "DISP" button (5).
Each time the button is pressed, display
will change as follows:
Play time
Track name
Artist name
Album name
NOTE:
If text data contains more than 16 charac-
ters, ">" mark will appear at the right end.
Holding down "DISP" button (5) for 1 sec-
ond or longer can display the next page.
78RB1-01E

Advertisement

Table of Contents
loading

Table of Contents