Functions; Overview - Grundfos CUE Series Product Manual

Functions

Overview

The table below shows the functions settings offered by
the CUE.
CUE functions
Operating modes, see page 13
Normal
Stop
Min.
Max.
Control modes, see page 14
Open loop
Proportional differential pressure
Constant differential pressure
Constant pressure
Constant pressure with stop function
Constant level
Constant level with stop function
Constant flow rate
Constant temperature
Constant other value
Setpoints, see page 17
Setpoint, CUE menu
External setpoint
GENIbus setpoint
Predefined setpoints from digital inputs
Additional functions, see page 20
Setting the direction of rotation
Status information
Logging information
PID controller
Stop functions
Dry-running protection
Duty/standby
Operating range
Motor bearing monitoring
Standstill heating
Ramps
Proportional differential pressure, parabolic
Hmax update
Differential pressure from two sensors
Start delay after power-up
Auto/manual restart after alarm
Limit exceeded
Copy settings
Pipe fill
Setting or reading via:
CUE GENIbus PC Tool*
Grundfos CUE
11