Grundfos CUE Series Product Manual page 12

Functions
CUE functions
Digital inputs, see page 27
Start/stop
Min. (Min. curve)
Max. (Max. curve)
External fault
Flow switch
Alarm reset
Dry running (from external sensor)
Accumulated flow (from pulse flow sensor)
Additional set of ramps, ramp selector
Predefined setpoints from digital input
Signal relays, see page 28
Ready
Warning
Alarm
Operation
Pump running
Relubricate
External relay control
Limit exceeded
Analog inputs, see page 28
External setpoint
Sensor 1
Analog output, see page 28
Feedback value
Speed
Frequency
Motor current
External setpoint input
Limit exceeded
MCB 114 sensor input module, see page 29
Sensor input 2
Temperature sensor 1
Temperature sensor 2
Default
Optional with GENIbus
Optional with PC-tool
* The PC Tool is a software program supplied on a CD and hardware con-
necting your computer with the CUE.
12
Setting or reading via:
CUE GENIbus PC Tool*
Grundfos CUE