Acer UL6500 User Manual page 41

How to use the Tool menu
Click on the Tool Tab on the control menu and the below will be displayed.
It can change the settings for the projector which is connected.
1
2
Crestron Control
1
Settings for the Crestron central control.
Projector
2
Setting for the projector.
Items
Projector Name
Location
Assigned To
DHCP
IP Address
Subnet Mask
Default Gateway
DNS Server
Send
User Password
3
To lock the control menu on the conputer with a password, check on "Enable".
Setting for the below items;
Items
New Password
Confirm
Send
The Projector Name can be changed.
(within 22 characters)
The location name can be changed.
(within 22 characters)
The user of the projector can be changed.
(within 22 characters)
When using DHCP, check on "Enable".
The address settings below will be invalid if checked.
Set IP Address for the projector.
Set subnet mask for the projector.
Set default gateway for the projector.
Set DNS Server for the projector.
Click to fix what is set on this Projector Menu.
Enter new password to change the password for the
menu.
(within 15 characters)
Enter the password you have set on the "New Password". The
error will show if not equal.
Click to fix what is set on this Admin Password.
40
3
4
Functions
Functions
control