Acer UL6500 User Manual page 25

This function allows you to select the input signal type RGB or Component for HDMI 1
or 2.
• Auto: Input signals are automatically recognized as RGB or component.
• RGB: Set when RGB signals are received.
• YPbPr: Set when Component signals are received.
HDMI Color Range
An optimum picture may not be displayed if an HDMI-capable device°¶s output signal
type and the projector°¶s input signal type do not match.
If this should occur, switch "HDMI Color Range".
• Auto: In most circumstances, "Auto" should be selected.
• Full Range/Limited Range: When the black levels of the image show banding or
appear faded, select the item that results in the best picture quality.
Advanced
Tint
Press for making skin tones purplish, press
Color
Press for less color intensity, press
Note
• Tint and Color are available for VIDEO or S-VIDEO mode.
Sharpness
Press for less sharpness, press
Gamma
When the darker areas of the image become diffi cult to see because of the image or
the projection environment, you can correct the gamma setting to make the image
brighter and easier to see.
BrilliantColor™
BrilliantColor™ uses Texas Instruments's BrilliantColor™ technology. The image
becomes brighter while the color reproduction is kept at a high level.
Noise Reduction
Video noise reduction provides high quality images with minimal dot crawl and cross
color noise.
3D Color Management
This function adjusts each of the six main colors that comprise the color wheel,
altering their "Hue", "Saturation", or "Value".
Reset Picture Setting
To reset all adjustment items.
for making skin tones greenish.
for more color intensity.
for more sharpness.
24