Rexroth Settings; General Information - Bosch REXROTH IndraControl VEH 30.2 Project Planning Manual

84/109 Bosch Rexroth AG
Software
9.4

Rexroth Settings

9.4.1

General Information

Fig.9-1: Application "Touchcal" for calibrating the touch screen
In case of an operating system update the program automatically
starts.
Touch exactly the five calibration points one after each other with a touch pen
(red crosses). After actuating the last calibration point, the OK button is dis‐
played to confirm the settings. Comparable to a pen in a graphics program
the proper calibration of the touch screen can be tested by free-hand draw‐
ings. Use the OK button to confirm successful calibration.
Fig.9-2: "TouchCal" calibration tool
Use the "Rexroth Settings" tool to set the basic network and application set‐
tings of the hand-held terminal. Start the tool via the Rexroth Settings desk‐
top icon or via the start menu Start ▶ Program Files ▶ Accessories ▶ Rexroth
Settings. In case of an operating system update the tool automatically starts.
DOK-SUPPL*-VEH*30.2***-PR03-EN-P
Rexroth IndraControl VEH 30.2 Hand-Held Terminal