Table of Contents
Advertisement
DOK-SUPPL*-VEH*30.2***-PR03-EN-P
Rexroth IndraControl VEH 30.2 Hand-Held Terminal
1
System Presentation
1.1
Overview
1.2
Device Variants
The IndraControl VEH 30.2 Hand-Held Terminal is a portable, PC-based op‐
erator and visualization device.
The 2-circuit, 3-stage enabling device as well as the 2-circuit stop pushbutton
ensure a safe operation of the IndraLogic and IndraMotion controls. The
IndraControl VEH 30.2 facilitates the comfortable configuration of machines
and installations located at widely distributed connection points.
All device variants feature a 213.36 (8.4") TFT display with always eight func‐
tion keys at the right side and left side of the screen as well as jog keys for up
to six axes for comfortable operation of the system. Additionally, service inter‐
faces are available: a USB connector on the front panel and an Ethernet in‐
terface on the VAC 30.2 connection module. Different cable variants allow an
individual adjustment to the conditions. The following table lists the most im‐
portant features of the IndraControl VEH 30.2. Differences between the de‐
vice variants are listed in
chapter 1.2 "Device Variants" on page
Display
Keys
Touch screen
Enabling device
Stop button
Interface
Service interface
Connection
Additional options
Tab.1-1:
Main features IndraControl VEH 30.2
The IndraControl VEH 30.2 is suitable for the following application ranges:
●
Operating and visualizing Bosch Rexroth control systems.
●
Configuration of machines and installations.
●
Operation and diagnostics of extended handling installations.
●
Remote visualization of operating panels.
●
Visualization of simple operating fields and assembly lines.
The specifications about the IndraControl VEH 30 devices made
in the documentation "Rexroth IndraControl VEP/VEH" DOK-
SUPPL*-VEP/VEH*****-PR01-EN-P are obsolete.
The IndraControl VEH 30.2 Hand-Held Terminals are available in different
variants.
Bosch Rexroth AG
System Presentation
213.36 mm TFT (8.4")
Yes
Yes
2-circuit, 3-stage
2-circuit
Ethernet
USB interface on the front
IndraControl VAC 30.2 with stop pushbutton
jumpering
Handwheel, 16-stage automatic override, availa‐
ble depending on the device variant (see
"Device variants IndraControl VEH 30.2" on page
6)
5/109
5.
tab. 1-2
Advertisement
Table of Contents
