Table of Contents
Advertisement
62/109
Bosch Rexroth AG
Display and Operating Components
Override
Handwheel
Left side
Override
Tab.6-3:
Additional elements of the IndraControl VEH 30.2
As option the Hand-Held Terminal IndraControl VEH 30.2 can be ordered
with an override switch. Divided up into 16 stages, the signals are transmitted
as 4 bit gray code to the control via a real-time protocol.
Optionally, the IndraControl VEH 30.2 can be ordered with a handwheel. Po‐
sition and direction of rotation are broken down into 16 bit data and are trans‐
mitted to the control via a real-time protocol. The application applies the dis‐
play of the set value. The set values are reset via an operating element of the
pertinent application.
DOK-SUPPL*-VEH*30.2***-PR03-EN-P
Rexroth IndraControl VEH 30.2 Hand-Held Terminal
Right side
Handwheel
Advertisement
Table of Contents
