TDE Instruments Digalox DPM72-PP Instruction Manual page 8

7. Mounting
Carefully insert the instrument into the panel cut-out. Insert the mounting bracket
from the back and push towards the panel until the instrument sits tight. Make
sure the mounting bracket is snapped into the side of the housing. To ensure IP65
protection (dust and water jet) when mounting in a front panel, use optional gasket
(separately available).
8. Specifications
Supply
Display
Measuring range voltage
Accuracy voltage
Internal resistance voltage
Measuring range ampere
Accuracy ampere
Internal resistance ampere
Measuring range frequency
Accuracy frequency
Recording of measurement
Alarm outputs
Operating temperature
Storage temperature
Front panel
Panel cut-out
Protection front
9. Cleaning
Observe the safety instructions before cleaning the instrument. Clean the
instrument with a dry lint-free soft cloth. Do not use solvents.
10. Contact Information
TDE Instruments GmbH, Gewerbestraße 8, D-71144 Steinenbronn
phone: +49 7157-20801
E-Mail: info@tde-instruments.de
Internet: www.tde-instruments.de, www.digalox.com
DPM72PP
10 - 24 V AC/DC or via USB (min. 5 V),
galvanically isolated
LCD graphic display 192 × 160 pixels
50/60 mV AC/DC shunt
±0.5 % true RMS
0/4 to 20 mA DC analogue signal
±0.5 % true RMS
3 mins. to 14 days
2 optocoupler outputs max. 30 V DC, 50 mA
0 °C to +50 °C
-20 °C to +70 °C
72 mm × 72 mm
68 mm × 68 mm
IP65 from the front
----- 8 -----
20 kΩ
6.2 Ω
-
-