TDE Instruments Digalox DPM72-PP Instruction Manual page 2

3. Description
The measurement modes analogue signal and AC/DC shunt are supported.
Minimum and maximum values are recorded and can be displayed optionally using
an external switch. Measured values are recorded over a time span of three minutes
up to 14 days. The time base as well as the display of the measure history can be
activated by an external switch. The measured values remain stored as long as the
device is supplied with voltage.
The following parameters can be adjusted using the USB software: scale endpoint,
scale caption, display style (pointer, tachometer, bar graph, and more), splash
image, thresholds for alarm output, hysteresis, and more. Recorded measurement
values can be read and a continuous transmission of the actual measuring value can
be enabled. Using the software, values can be viewed and exported as CSV.
Front
1 Unit or free text
2 Threshold values
3 Upper scale caption
4 Graphical measurement display
5 Digital measurement value
6 Lower scale caption
Back
1 2 optocoupler switch outputs
2 DIP switch for setting measurement
mode and upper scale caption
3 Supply voltage input
4 Jumpers for configuration or
connection external switch for
activating/switching measurement
mode, graphical historic data display,
min/max display, auto-scaling
5 USB interface for alternative power
supply and software communication
interface
6 Measurement inputs
----- 2 -----